In general, this means the baby camera and cord should be placed at least 3 feet away from baby's crib.
Even if you think your baby would not touch the baby camera, it's too risky to leave it within easy reach of your baby. Even baby camera cords that are secured to the rail could be yanked or twisted by a curious child.
Be careful not to allow the baby camera cord to dangle between the cot and a wall. You should use the 3-foot-minimum spacing between baby and the cord in this case, too.
Place the baby camera on a tabletop no less than 3 feet away from your baby’s crib. Feed the power cord down the back of the table or use wall clips to secure the cord away so your baby cannot reach the cord. Plug in the power cord, check your smartphone or tablet to ensure that you are getting a good view of your child and that there are no obstructions
When little arms get longer and toddlers learn to climb and reach for things, you may need to move the baby camera to prevent access to the cord.
Don't forget to check those locations to be sure you can place the baby camera out of baby's reach.
While you're securing the baby camera cord, take a moment to look around for any other strangulation hazards, as well. One common culprit is window blind cords that are within baby's reach. Cords for other electronics and nursery decor with ribbons or decorative cords may also be a risk.
Do not use the baby camera near water (such as bathtub, sink, etc.) and safely keep the baby camera away from heat sources (such as stoves, radiators, etc).
Make sure there is proper ventilation around the baby camera and do not place on sofas, cushions, beds, etc. which may block ventilation.
The baby camera is not a toy. Do not allow children to play with the camera.
Adhering to these baby camera safety tips will help you to ensure your child stays safe and you can effectively enjoy the best use of your baby c
The first step is to make sure you turn on security features during the installation process. Follow the instructions, and make sure you set up a strong password at least eight characters long with a mix of symbols and upper and lower case letters.
Make sure you keep the camera software and the mydlink™ Baby app up-to-date.